SS series Centrifugal Submersible Sand Slurry Pump designed to handle a wide range of slurries and abraisive particles in submersible applications in industiral and mining organization.
SS series submersible sand slurry pump designed to handle a wide range of slurries and abrasive particles in submersible applications in industrial and mining organization. Clearing silt in sedimentation basin, pumping sand for seashore or ports, etc.
1. Power supply: The power source is 50(60)Hz/380(415,660)V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor.
2. Temperature of the medium: The temperature of the medium cannot exceed about 60Celsius, and the medium does not contain inflammable or explosive gases.
3. Max weight density of the solid particle: The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%.
a. Large cut water clearance: The pump casing features a large cut water clearance which allows the easy passage of large solids and reduces wear and erosion to improve service life and prevent loss of efficiency.
b. Integral agitator: The 27% chrome white iron agitator assists in the pumping of slurries by breaking up large particles and agitating high concentrations of solids.
c. F class motor insulation
Support frame and strainer
Double mechanical seal
Oil chamber leakage probe
Optional external cooling
|Pump Capacity||Up to 2200m3/h|
Up to 60m
Cr27, Cast iron, Stainless Steel
Casing and Impeller
27% Chrome white iron
Up to 70℃
Up to 1480rpm