Non-clogging Submersible Sewage Pump is electro submersible centrifugal pumps designed for pumping waste water, effluent and solids laden water in municipal, industrial, mining and civil construction applications，Large flow non-clog hydraulic components, which greatly improve the passing capacityof waste water，double channel series mechanical seal made of hard anticorrosive tungsten carbide,which is durable and wear resistant
1.Product introducation of non-clogging submersible sewage pump
WQ series submersible sewage pump is mainly used for municipal works, industrial buildings, hotels, hospitals, civil air defence, mines etc. Trades to drain off the sewage, waste water, rainwater and living water in cities containing Sold grains and various long fabrics.
2.Details of non-clogging submersible sewage pump
3.Performance of non-clogging submersible sewage pump
4.Specification of non-clogging submersible sewage pump
WQ Clean Water Performance
5.Product use conditions of non-clogging submersible sewage pump
1.The medium temperature should not be over 40 C, the density 1200Kg/m , and the PH value within 5-9.
2.During running, the pump must not be lower than the lowest liquid level, see " lowest liquid level" in the drawing of installation dimensions(covering theautomaticcooling system), means lowest liquid level without no automatic cooling system.
3.Rated voltage 380V, rated frequency 50Hz. The motor can run successfully only under the condition the deviations of both rated voltage and frequency are not over 5%.
4.The maximum diameter of the solid grain going through the pump has notto belarger than 50% of that of the pump outlet.