Model NO.: IS80-50-250A
Max.Capacity: >400 L/min
Material: Cast Iron
Assembly: Pipeline Pump
Start Up: Electric Pump
Application: Clarified Water Pump
Media: Water Pump
Theory: Centrifugal Pump
Fluids: Transport Diesel, Water
Application Fields: Textile Industry, Petroleum, Chemical Industry
Working Pressure: ≤1.6MPa
Head Range: 8-150m
Transport Package: Standard Export Packing or According to Customers′
Driving Type: Motor
Structure: Single-stage Pump
Type: Jet Pump
Industry: Mechanical Pump
Performance: No Leakage Pump
Standard or Nonstandard: Standard
Category: Single Stage 5.5kw End Suction Centrifugal Pump
Temperature: -20 Degree C~120 Degree C
Flow Range: 1.5-500m3 Per Hour
IS High efficiency No leakage end suction centrifugal pump
>>> Product Overview
IS High efficiency No leakage Split-case end suction centrifugal pump is high-effective energy-saving products, split-case end suction centrifugal pumps are successfully designed by ways of adopting the property data of worldwide centrifugal pumps and the unique advantages of vertical pumps, it is strictly in accordance with ISO2858 world standard and the latest national standard JB/T53058-93. This Hydraulic pump develops into hot water pump (KYWR/KYLR), chemical engineering pump (KYHL) and oil pump (YG) according to different medium.
The impeller is fixed up directly on the lengthening shaft, which results in short axial length. The centrifugal pump and motor coincide perfectly, which effectively reduces the axial and radial force.
Stable running, low noise, high concentricity of components. The impeller has the advantage of best dynamic and static balance, so no vibration at running.
Easy to maintain Split-case End Suction Centrifugal Pump. It is no need to remove the pipeline for check-out and maintenance.
According to the installation condition of the worksite, IS high efficiency no leakage End Suction Centrifugal Pump could be mounted vertically or horizontally etc.
According to the requirements of the flow and head, the end suction centrifugal pumps can be mounted in parallel or in series.
Materials of KYHL, KYHW chemical engineering pump: zg0q r1 8nil 2mo2ti (AISI 306), zg1qr18nil2mo2ti (AISI 307), zg1qr18ni9 (AISI 303), zg1q r18ni9ti (AISI 305).
>>> Working Conditions
Maximum working pressure is less than 1.6MPa, which refers to the inlet pressure and the outlet pressure all together is less than 1.6MPa. The testing pressure is 2.5MPa. Cast steel will be used for the flow passage components and joint parts when the working pressure is larger than 1.6MPa.
Proper medium: clear water without solid particles or the solid particle content is no more than 0.1%of the water and diameter is less than 0.2mm.
The environment temperature should not be higher than 120oC. The relative humidity should not be more than 95%.
IS series end suction horizontal centrifugal pump is used to deliver clear water and other liquids similar to water in physical properties for industrial and cities water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, warming systems, cycle booster of cold and hot water in bath rooms as well as for industrial equipments. The medium temperature should be lower than 80oC.
ISR series vertical hot water pump is used for the hot water booster cycle systems and the heat transport systems in heat-stations, residual heat utilization, metallurgy, chemistry, tactile, wood-processing, paper-making, industrial boilers. The medium temperature is lower than 120oC.
ISG series vertical chemical pump is used to transport the corrosive liquids containing no solid particle. The viscosity of liquid is similar to water. It can be used in light and textile industries, petroleum, chemical industries, metallurgy, electricity, paper-making, food, medicine and synthetic fiber industries etc. The working temperature is from 20oC to120oC.